Automatic adsorb screw fastener machine double screwdrivers double platform

Product Specification:

Instructions for product selection:

Adopts vacuum suction screw method, high universality, overcome the blowing screw can't send the screw length diameter ratio less than 1.2mm, also overcomes the disadvantage of magnetic suction way can't suction stainless steel screw . for M1.0 - M4.0 screws all can be applied, such as screw size changed, just need to change the suction nozzle.

1.Applies to most of the screws, strong commonality, the screw length to diameter ratio and material there is no requirement.
2.Can replace artificial specific screw lock pay operations, realizing mechanization production.Reduce the labor intensity of workers.The traditional manual screw placement, and alignment of the screw head need to work takes up a lot of time and energy.
3.Do not need to match the external computers , convenient installation.Setting operation is simple, the staff quickly master the operation skill and debugging.
4.Apply to mobile phones, digital products, photoelectric, health care, small household electrical appliances.

Composition and design description:

1. Structure: it is mainly composed of automatic screw conveying system, x-y-z movement platform, locking screw mechanism and electrical control system.

2. Replace the product: you can directly replace the fixture, the PLC stored in the corresponding workpiece coordinate program can be produced.

3. The time for locking a screw is about 1.2s. (depending on the screw length slightly different).

4. The locking screw is the automatic screws sample provided by customers. The tolerance of incoming material size is allowed to be ±0.2mm.

5. The locking products: according to the customer's product samples.

6.Jig: according to the product design, accurate positioning, convenient replacement.

7. During the use of the equipment, the product shall not be damaged (such as product deformation, scratch, appearance damage, etc.).

8. Reliability and stability: the equipment can work continuously for 20 hours a day without failure, and the failure rate is low, which is suitable for mass production.

Main functions:

1. With intelligent detection function, it can detect missing lock, floating lock, sliding tooth, etc.

2. The cycle of locking a workpiece is within 5s (4 screws)

3. The locking screw is the automatic screw sample provided by customer, and the tolerance of incoming material size is allowed to be ±0.2mm

4. Locking products: customized equipment according to product samples provided by customers

5. Jig: according to the product design, multiple rows and multiple columns placement. Accurate positioning and easy replacement are required

6. No damage to products (such as product deformation, scratch, appearance damage, etc.)

7. Reliability and stability: under the premise of qualified product quality, the equipment can lock screws continuously for 20 hours a day.